GE Healthcare Carescape Masimo SPO2 Patient Monitor from $50.11/mo

GE PDM Carescape Masimo SPO2 Module

GE PDM Carescape Masimo SPO2 Module
Product Specifications
BRAND  GE Healthcare
MODEL  Carescape Masimo SPO2
DESCRIPTION
The base hemodynamic parameter module, known as the Patient Data Module (PDM), is offered in versions featuring Ohmeda, Nellcor, or Masimo SpO2 technology, and it can also be obtained with or without IBP capability. What sets the PDM patient module apart is its ability to retain all measured data, irrespective of its source, whether directly from the PDM module or via interfaced external devices. Each PDM module has the capacity to measure 3L/5L/6L/12L ECG, supports continuous arrhythmia analysis across 4L, can measure CO, Spo2, accommodate up to four IBP, two temperature measurements, and utilizes the top-tier GE Dinamap algorithm for noninvasive blood pressure measurements. The module's performance is contingent on the specific software features installed in your Carescape monitor.
ADDITIONAL INFORMATION
FEATURES:
  • The Patient Data Module captures trend data throughout the transfer process, so providers have the right information at every touch point to ensure fast response to critical events.
  • To ensure monitoring continuity throughout transport, the Patient DataModule can power the Transport Pro®device in case of a low or missing battery.
  • The Patient Data Module can help you improve patient throughput and cost-efficiency by enabling you to flexibly move patients to the most appropriate care areas for their needs.
SPECIFICATIONS:
  • Dimensions:
    • Height: 2.75 in ( 7 cm)
    • Width: 5.75 in (14.6 cm)
    • Depth: 8.5 in (21.6 cm)
    • Weight: 1.1 kg (2.4lb) w/o Battery 1.3 kg (2.9 lb) w/ Battery
       
  • Batteries:
    • Type Removable Lithium-Ion
    • Quantity One
    • Voltage 11.1 Volt (Nominal)
    • Capacity 1.8 Amp Hour (Nominal)
    • Charge Time Approximately 2.5 Nours
    • Run Time Approximately 1.5 hours (new, fully charged)
    • Battery Life 300 Cycles to 60% capacity
       
  • Operating Conditions:
    • Heat Dissipation 15.36 BTU/hour
    • Temperature 10ºC to 35ºC (50ºF to 95ºF)
    • Relative Humidity 15% to 95% (non-condensing)
       
  • Storage Conditions:
    • Temperature -40ºC to 60ºC (-40ºF to 140ºF)
    • Relative humidity 15% to 95% (non-condensing)
       
  • ECG:
    • Standard leads available I, II, III, V1 to V6, aVR, aVL, and aVF
    • Leads analyzed simultaneous Twelve (I, II, III, V1 to V6, aVR, aVL, and aVF)
    • Lead fail Identifies failed electrodes and switches to those intact
    • Lead fail sensing current Active electrodes: < 30 nA each, referenced electrode < 270 nA
RENT, FINANCE AND BUY OPTIONS

Rent for short-term needs, finance the purchase by leasing, or just purchase outright.

Offered by Jordan at Supplier #9626 in Tustin, CA
  Rental Rates   Finance Rates  Message Jordan

Don't see the specific model you need?

Request supplier quotes.

KWIPPED is an equipment rental and leasing marketplace. Suppliers have additional inventory available not listed on KWIPPED.
Our quoting and collaboration platform is an incredibly easy and efficient way to source from our entire supplier network.
Get quotes

Not sure if you should rent or finance?

Tell us what you're thinking and will offer a recommendation.

We have equipment rentals and leases for all your medical needs

First time using KWIPPED?

We've made it really easy.

Here are some resources to get you started with your first rental