GE Healthcare Lunar Prodigy Bone Densitometers / DEXA Scanner from $586.93/mo

GE Lunar Prodigy Advance Bone Densitometer

GE Lunar Prodigy Advance Bone Densitometer
Product Specifications
BRAND  GE Healthcare
MODEL  Lunar Prodigy
DESCRIPTION
The GE Lunar Prodigy Advance delivers high-quality DXA (Dual-Energy X-ray Absorptiometry) assessments with outstanding precision while maintaining radiation doses below the industry average for bone densitometers. This advanced system not only prioritizes accuracy in bone density measurements but also contributes to dose efficiency. With a focus on patient comfort and throughput, the Lunar Prodigy Advance excels in delivering rapid spine (10 seconds), femur (10 seconds), and total body measurements. This unit is designed to elevate the overall performance of bone density assessments, making it a valuable asset in healthcare settings.
ADDITIONAL INFORMATION
STUDIES AVAILABLE:
  • AP Spine
  • Femur
  • Dual Femur
  • Forearm/supine forearm
  • Total body BMD
  • Dual-energy Vertebral
  • Assessment (DVA) (lateral and AP) FRAX® tool
  • Advanced Hip Assessment (AHA) w/ hip strength analysis
  • Hand/supine hand
  • Orthopedic hip
  • Pediatric spine/total body
  • Pediatric femur
  • Total and regional body composition
  • Small animal total body
SPECIFICATIONS:
  • Scanner Size (Full-Size Bed):
    • 262(W) x 109(D) x 128(H)cm
    • (103" x 43" x 51")
       
  • Scanner Size (Compact Bed):
    • 201(W) x 109(D) x 128(H)cm
    • (79" x 43" x 51")
       
  • Scanner Weight (Full-Size Bed):
    • 272kg (599lbs)
       
  • Scanner Weight (Compact Bed):
    • 254kg (559lbs)
       
  • Patient Table Top Height (Adjustable):
    • >63cm (25")
       
  • Maximum Patient Weight Supported:
    • 159kg (350 Ibs)
       
  • Drive System:
    • Stepper Motor w/ Reinforced Drive Belts
       
  • Active Scan
    • Area (Full-Size Bed): 197.5cm x 60.0cm
       
  • Active Scan Area (Compact Bed):
    • 135.2cm x 59.5cm
       
  • Start Position Indicator:
    • Cross Laser Light (Class II, <1mW Power)
       
  • Pad:
    • Washable Patient Mat
       
  • Attenuation of Patient Support Table:
    • <0.7mm AL
       
  • Communication Cable:
    • 7.62m (25ft) Serial
       
  • Scanner Leakage Current:
    • Meets IEC 60601-1 Safety Standard
       
  • Detector Specifications:
    • Detector: Direct-Dgital Detector
       
  • Environmental Specifications:
    • Power:
      • 100-120 VAC 50/60Hz 20A dedicated circuit
      • 230-240 VAC 50/60Hz 20A dedicated circuit
    • Consumption:
      • Idling 40VA, Scanning 450VA
    • Distortion:
      • Sinusodal Waveform, Less Than 5% THD
    • Humidity:
      • 20%-80% Non-Condensing
    • Room Temperature:
      • 18°C-27°C (65°F-81°F)
    • Scanner Heat Output:
      • Idling 150 BTU/hr, Scanning 1500BTU/hr
    • Console Heat Output:
      • Approximately 400BTU/hr w\ 17” Monitor
    • Ventilation:
      • All Cooling Vents Must Remain Unblocked
    • Dust, Fumes, Debris:
      • Install System in Clean, Ventilated Area
         
  • Standard Hardware Configuration
    • >900MHz Pentium processor
    • 512 MB RAM
    • >10GB hard disk
    • 8X CD ROM drive
    • 17” SVGA monitor with at least 1024 x 768 32-bit color
FINANCE AND BUY OPTIONS

Rent for short-term needs, finance the purchase by leasing, or just purchase outright.

Offered by Jordan at Supplier #9626 in Tustin, CA
  Finance Rates  Message Jordan

Don't see the specific model you need?

Request supplier quotes.

KWIPPED is an equipment rental and leasing marketplace. Suppliers have additional inventory available not listed on KWIPPED.
Our quoting and collaboration platform is an incredibly easy and efficient way to source from our entire supplier network.
Get quotes

Not sure if you should rent or finance?

Tell us what you're thinking and will offer a recommendation.

We have equipment rentals and leases for all your medical needs

First time using KWIPPED?

We've made it really easy.

Here are some resources to get you started with your first rental