Zurn Z1186-ST-300 Grease Trap from $58.60/mo

Zurn Z1186-ST-300 10 GPM Oil Trap W/Integral Storage Tank

Zurn Z1186-ST-300 10 GPM Oil Trap W/Integral Storage Tank
Product Specifications
BRAND  Zurn
MODEL  Z1186-ST-300
DESCRIPTION
Zurn Z1186-ST-300 10 GPM Oil Interceptor 
These oil interceptors feature fabricated steel construction with an acid resistant epoxy coat on the interior and exterior, bronze cleanout plug, visible double wall trap seal, removable combination pressure equalizing/flow diffusing baffle and sediment bucket, horizontal baffle, adjustable oil draw-off and vent connections either side, secured gasketed non-skid cover complete with flow control fitting and a threaded inlet and outlet.
Note: Location of outlet from bottom of interceptor cannot be changed.
This Zurn Z1186 oil interceptor is furnished with a 1-1/2" NPT adjustable oil draw-off assembly. Since oils are lighter than water, gravity causes the oil to rise to the surface of the water. The oil draw-off assembly allows the separated oils, and other similar light density substances, to be automatically drained out through a properly adjusted internal stand pipe. A pipe connection from the internal adjustable standpipe is connected to an oil drain line leading from the oil interceptor to an oil storage tank. The standpipe sleeve (brass tube) must be adjusted so the opening is 1/8" above the top of the normal water flow level in the interceptor chamber. The oil that floats to the surface will drain off by gravity flow as waste water flows through the interceptor. When the adjustable sleeve in the standpipe is correctly set, no water will drain off with the oil. There is no need for any manual skimming of the oil.
Dimensions:
Model Z1186-ST-300 Oil Interceptor Heavy Duty Commercial
  • 7 Gal Water Capacity 10 GPM
  • 6 Gal Capacity Oil Storage Tank
  • Outlet Pipe Size 2"
  • Width   Front to Back 16-7/8" (+ 4-11/16")
  • Length Side to Side (Inlet to Oulet)  23-1/16"
  • Height Floor to top    13-7/8"
  • Bottom to Center of Inlet  8-1/8"
  • Number of Covers 1
  • 95 Lbs
FINANCE AND BUY OPTIONS

Rent for short-term needs, finance the purchase by leasing, or just purchase outright.

Offered by Adam at Supplier #17676 in Atlanta, GA
  Finance Rates  Message Adam

Don't see the specific model you need?

Request supplier quotes.

KWIPPED is an equipment rental and leasing marketplace. Suppliers have additional inventory available not listed on KWIPPED.
Our quoting and collaboration platform is an incredibly easy and efficient way to source from our entire supplier network.
Get quotes

Not sure if you should rent or finance?

Tell us what you're thinking and will offer a recommendation.

We have equipment rentals and leases for all your restaurant needs

First time using KWIPPED?

We've made it really easy.

Here are some resources to get you started with your first rental