Midmark/Ritter M11-022 Ultraclave Sterilizer

DESCRIPTION

Midmark M11-022 Automatic Refurbished Autoclave Sterilizer 

When purchasing a used M11, here are a few buying tips. Always make sure the serial number begins with a V. Any other letter indicates you are purchasing the Old Style autoclave that will only cause you grief.  The manufacturer no longer has parts or support for this older machine. You should always ask for both the serial number and for a picture of the sterilizer.  If the serial number does not begin with the letter, V stay away from this autoclave.  Also, the display should always be green, not red. Once you establish it is a V series serial number another important thing to know is this. Has the mother board ever been replaced? There was a point of failure on the fuse housing causing most of these autoclaves to fail.  Midmark recognized the issue and updated the control boards on all their machines.  But unfortunately, there were hundreds of these autoclaves still sold with the faulty board. The only way to know is to take the cover off the autoclave and find out if the control board has a green back. All the updated boards have a red back not green.
This particular M11-022 autoclave we have for sale has been through our refurbishment process as follows:
This M11-022 V series serial number autoclave has been through our careful refurbishment process. No one does it better.

• Check and replace any old control board with the updated PC Control Board from the factory (Part No: 002-1992-00)
• We conduct a thorough inspection of ALL components, cosmetics, and functionality.
• Replace all worn or pour looking parts.
• Sand and paint the frame and chassis as needed.
• Clean reservoir tank by removing debris and particulates.
• Clean and polish chamber and reservoir. Blow out all lines.
• Replace safety mechanisms, controls, relays, condenser, thermostat, valves, switches, filters and all other parts as needed.
• Clean and lubricate all moving parts.
• Inspect and repair all pressure and water leaks.
• Check and lubricate door closure.
• Replace door gasket regardless of condition.
• Test and calibrate to manufacturer's specifications.
• Repeated cycle testing for added assurance.
• Spore testing at various positions within the chamber.

This M11 autoclave is a fully automated machine. Once you load your items and set the desired program, the sterilization cycle will perform all normal functions, and then automatically open the door when everything is complete. The design of the M11 is best for the active surgery center, medical clinic, industrial lab, doctor's office, dental practice, veterinary facility, or tattoo establishment will The stainless steel chamber in this M11 autoclave is ideal for sterilizing liquids, media, instruments, glassware, soil or waste products.
This refurbished autoclave unit is a great sterilization tool for moderate to high volume environments seeking a "set it and forget it" process which allows personnel to continue performing other tasks.
FeaturesVolume / Speed / Power / WeightDimensions

• • Fast and easy operation for efficient processing

 

• • Front panel programmable controls

 

• • This refurbished autoclave has a safety device to prevent premature opening while unit is pressurized

 

• • Patented automatic door opening when cycle completes

• • 6-1/2 Gallon Chamber (24.6 Liters)

 

• • This refurbished autoclave holds four trays

 

• • Cycle Time: Varies based on items to be sterilized - Wrapped instruments 18-28 minutes
    
     
  • Unit Weight: 99 lbs (45 KG)
     
  • Electrical: 115 Volts, 1425 Watts, 50/60 Hz, 15 Amps

• • Overall Size:Width:
    17-3/4" (45 cm)
    Length:
    23-3/4" (60.3 cm)
    Height:
    17-3/4" (45 cm)

• • Chamber:Diameter:
    11" (27.9 cm)
    Length:
    18" (45.7 cm)

• • Large Tray Size:Width:
    9" (22.9 cm)
    Length:
    15" (38.1 cm)
    Height:
    1-1/8" (2.8 cm)

• • Small Tray Size:Width:
    6-5/8" (16.8 cm)
    Length:
    15" (38.1 cm)
    Height:
    1-1/8" (2.8 cm)