The Fisher Scientific Isotemp Model 282A vacuum oven is ideal for general vacuum drying and heating applications. The spacious interior is well suited for a variety of drying needs. This unit is designed to operate with reduced pressures and/or inert atmospheres and is equipped with separate vacuum and gas ports, each with its own control valve.
ADDITIONAL INFORMATION
Features include:
Automatic time and temperature control with LED display
Seven-day programmable timer can cycle the oven on or off up to eight times per day
Self diagnostics for open thermocouple, shorted triac, open heater, and over-temperature prevention plus panel alert lights
Built-in safety controller prevents temperature runaway
Backup thermostat
Equipped with separate vacuum and gas ports with control valves
Chamber door with full-view, tempered safety glass
Silicone door gasket and stainless-steel interior
Cold-rolled steel exterior is protected by baked-on epoxy enamel finish
Capacity to hold up to eight shelves
Specifications:
Dimensions, Interior: 18D x 12W x 12 in.H (46 x 31 x 31cm)
Exterior: 23L x 26W x 22 in.H (58 x 66 x 56cm)
Capacity: 1.5 cu ft (0.04 mm3)
Shipping weight, 205 lb. (92.9kg)
Temperature range: Ambient to 280°C
Heat rise time: Ambient to 100 deg C in less than 30 min.
Setpoint accuracy: Less than ±2°C
Setpoint reproducibility: ±0.1°C
Display: 3-digit LED display to nearest 1°C
Vacuum Pump-down time: To < 1mm in 3 min using a pump with 100 L/min air
displacement
Atmosphere control: Use with non-corrosive, nonflammable gases such as nitrogen and CO2.
KWIPPED is an equipment rental and leasing marketplace. Suppliers have additional inventory available not listed on KWIPPED.
Our quoting and collaboration platform is an incredibly easy and efficient way to source from our entire supplier network.
Get quotes
Not sure if you should rent or finance?
Tell us what you're thinking and will offer a recommendation.
