10.8” x 11.8” x7.3”
90-132 VAC, current draw 0.45A nominal, 54 watts, fused at 0.4A, 50/60 Hz, 3 wire, single
Approximately 8 hours with one channel operating at 125 mL/hr
Less than 100 microamps
*Recommended maximum rate in the Controller Mode is 500 mL/hr
Volume To Be Infused Selections:
1mL/hr if set rate is 1 mL/hr or above; or set rate if rate is 0.9 mL/hr or below
Controller Mode: Container height + 12°
Pump Mode: 10 + 2 psi (517 + 103 mmHg) for rates above 30 mL/hr. For rates of 30 mL/hr and below, the occlusion pressure will be less than 10 psi, and is rate-dependent.
Selectable Mode: 25-517 mmHg in 25 mmHh increments to 500 mmHg
Air In Line Detection:
Dual rate Programmable
Nurse Call Feature:
Activates an externally powered system when any alarm, malfunction, press start prompt, or infusion complete advisory is issued. Requires a DIN plug with 6 pins at 240°.
RS-232-C Communication Data Port Connector:
Electronic Industry Association (EIA) Standard requires a standard 9-pin sub-miniature male mating connector with a standard screwlock backshell with jack screws for proper mechanical interface.
Recommended Operating and Storage Conditions:
Operating Temperature: +5°C to +40°C
Storage Temperature: -30°C to +70°C
Operating/Storage Humidity: 0% to 95% Relative at 35°C
Speak with a KWIPPED representative at (800) 273-8404 (9-5pm ET), email [email protected] or chat with us below:
KWIPPED offers unparalleled efficiency to source equipment rentals and leases from a global network of equipment suppliers.
Tell us where to send your quotes.
Eventually, we'll need a few more details to facilitate your rental/finance, but we know your time is valuable.
Do you want to submit the request now, or do you have some time to enter company details?
Upon letting us know the information below, you will have full access to KWIPPED's platform.