Reelstrong PT15 Single Axle Extendable Pole Trailer

DESCRIPTION

PT15 Extendable Pole Trailer

CAPACITIES 17,250 lbs. GVWR @ 15% Tongue Weight 3,850 lbs. Approx. Curb Weight 13,400 lb Approx. Payload 95.50” Wide 20’ / 25’ / 30’ Retracted & Extended Lengths Designed to handle a 40-55’ poles

AXLES 15K Dexter Sprung Axle

WHEELS & TIRES (4) 17.5 x 6.75 HC / 8 on 275mm BC w/ 5.60 Outset (4) ST-215/75R17.5 LR-H Tires

BRAKES 12.25” x 5.00” Electric

POLE SECUREMENT ALL Pole Rests: 5” H Beam Winch Binders w/ Ratcheting Breaker Bar

CARGO AREA 85.5”L X 43.75”W

STANDARD TRAILER BODY 6” X 6” X 3/8” (“Square” for Max Equal Lateral and Vertical Strength) Male Extendable Tongue. 8” X 8” X ¼” Wall Female Tongue Tube 7-Position Adjustable Hitch  ⅜” X 36” GR70 Yellow Zinc Safety Chains with Hooks Removable Male Extension Tongue Standard Cargo Area 12,000 lbs. Static Front Jack w/ Spring Return Fenders: ⅛” Fabricated Diamond Plate

WIRING DOT / ICC-- FMVSS / CMVSS Approved LED ULTRA- HIGH VISIBILITY 180 DEGREE BULLET Marker and Clearance Lights
LED Sealed Beam Rubber Mounted Stop, Turn, Tail and Marker Lights Internal Cat Track Protects Wiring Removable Rear Access Door to Access Cat Track and Wiring Breakaway Kit with Absorbed Glass Mat (AGM) Battery 100% Sealed Heat-Shrinked Wiring Connections w/ Full Loom

FULLY PROTECTED 7 or 6 Way Female Plug acts as Junction Box Recessed in FRAME RAIL. No Easily Damaged Plastic Junction Boxes

STANDARD FEATURES LIFETIME WARRANTY MEGA-ROLLER 6-ROLLER Telescoping Tongue (NO WEAR PADS TO REPLACE))

SELF-SECURING SECURELOCK™ Tongue Lock Roller System (No Loose Pin) NON-BINDING/FREEZING EZ-SLIDE POLE-

CENTERING STANCHIONS Oil Bath Hubs Wheel Chock Holders Adjustable Spring Pads Slipper Springs Reinforced Spring Hangers

PAINT/FINISH Galvanizing w/ Ten (10) Year Structural Warranty All Structural Tubing Galvanized on the Inside and Out and Will Probably Last a Lifetime

PT-LB Removable Light Bar All TIG Welded Aluminum w/ Claw-Tooth for Superior Grip (2) Two Flag Holders (4) Four 4” Stop / Turn / Tail Rubber Mounted Sealed Beam LED Lights (3) Three Center ID Marker Lights (2) Two Side Marker Lights 35’ Power Cable w/ 7-Way Plug
7-Way REMOVABLE, DOUBLE ENDED NON-HARD WIRED Light Plug. Prevents yank-out damage and  easier maintenance. 7Way ILO 4-Way more readily available

16-HE-3/8C 6-Bolt 16" Pintle Hitch Extension (2) Two 3/8" Safety Chains Extended at 52" Long Extended Breakaway Cable