Perkin Elmer, Gene Amp 9600 System, PCR, Thermal Cycler

Perkin Elmer, Gene Amp 9600 System, PCR, Thermal Cycler
Product Specifications
BRAND  Perkin Elmer
MODEL  Gene Amp 9600 System
DESCRIPTION
Sample Compartment    The sample compartment contains an aluminum block with 96 sample positions in an eight by twelve microplate format
 
A heated cover over the sample vessels eliminates the need for oil
Sample Tubes   The sample compartment can hold:
96 MicroAmp Reaction Tubes (0.2-ml)
Electrical:
There are three versions of the GeneAmp PCR System 9600.  The power requirements of these instrument versions are:   
-           120 VAC, 60 Hz, 10 Amps, 15-amp slow blow fuse
-           220-240 VAC, 50 Hz, 5 Amps, 8amp slow blow fuse
-           100 VAC, 50-60 Hz, 12 Amps, 15-amp slow blow fuse
Control Panel    The instrument control panel consists of the display, keypad, and indicator lights
Display The GeneAmp PCR System 9600 uses a 40-character blue luminescent display (20 characters x 2 lines).
The sample temperature is displayed in degrees Celsius to the nearest 0.1 degree C
Keypad The keypad consist of nine function keys and ten numeric keys
Indicator Lights: There are three indicator lights: 
Heating
Cooling
Hot
Sample Temperature Range       The temperature range of the sample block is: 4.0 degrees to 99.9 degrees C
Sample Temperature Accuracy   The displayed sample temperature matches the average true sample temperature within +/-0.75 degrees C.
Displayed Sample Temperature  The displayed sample temperature will match the specified setpoint temperature to within +/-0.2 degrees C, centered around the setpoint temperature two minutes after the sample temperature is within 1 degree C of setpoint
Sample Block Temperature Uniformity    The sample block temperature uniformity is: +/-0.5 degrees C 30 seconds after the clock starts, over the range 50.0 to 99.9 degrees C
Sample Temperature Overshoot An average of 96 sample temperatures shows less than 0.5 degrees C overshoot for upramps and downramps
Ramp Time Repeatability           Thermal setpoints are achieved within +/-5 seconds (not including the first cycle)
Sample Heating and Cooling Rate          The sample temperature ramp rate for heating and  cooling is approximately on degree C per second
The GeneAamp PCR System 9600 uses an RS-232C serial port as its printer interface.  In addition, the following specifications apply:     Baud Rate: 9600
Setup: no parity, 8 data bits, on stop bit
 
Dimensions:
Physical Dimensions of the instrument are:         Height: 30.5 cm (12 in.)
Width: 52 cm (20 in.)
Depth: 61 cm (24 in.)
Weight: 40.5 kg (90 lbs.)
 

Don't see the specific model you need?

Request supplier quotes.

KWIPPED is an equipment rental and leasing marketplace. Suppliers have additional inventory available not listed on KWIPPED.
Our quoting and collaboration platform is an incredibly easy and efficient way to source from our entire supplier network.
Get quotes

Not sure if you should rent or finance?

Tell us what you're thinking and will offer a recommendation.

We have equipment rentals and leases for all your laboratory needs

First time using KWIPPED?

We've made it really easy.

Here are some resources to get you started with your first rental

We're here to help!

Speak with a KWIPPED representative at (800) 273-8404 (9-5pm ET), email [email protected] or chat with us below: