Morrison MS40 Powered Material Spreader

PRODUCT DESCRIPTION

Ideal for all types of after-pour applications.
The Morrison Spreader is ideal for all types of after-pour applications, such as hardeners, colorings, light reflective coatings, etc.
This model works with powder-based materials and trap rock with aggregate up to 3/8″ (9.5 mm) in size. Superior material control is achieved with our independently controlled flow rate and hopper travel speed. The spreader is easily assembled and can be configured to suit your needs.

Powered by a Honda GX160.

• Available in 2.5′, 5′ and 10′ (0.7, 1.5, 3 m) sections.
• Material flow is adjustable from 2 ounces to 3 pounds (0.05 to 1.4 kg) per square foot.
• Bridge section weighs only 7 lbs (3.2 kg) per foot. Hydraulically agitated hopper weighs 308 lbs (140 kg).
• Flow rate control is independent from hopper travel speed.
• Hopper height is adjustable from 2″ (5.0 cm) to 18″ (45.7 cm) over slab.
• Bolted construction makes on-site length changes and adjustments quick and easy using everyday tools.
• Metered flow valve assures precise application of expensive toppings.
• The MS40 is capable of spanning slabs from 10′ (3 m) to 75′ (23 m).

TECHNICAL SPECS

• Capacity
  • 4.5 cubic ft (127 l)
• Maximum Load
  • 600 lbs. (272 kg)
• Engine
  • 5.5 hp Honda
• Discharge Height
  • Adjustable from 2" (5.0 cm) to 18" (121.9 cm)
• Discharge Width
  • 48" (122 cm)
• Weight Hopper
  • 461 lbs (210 kg)
• 2.5' (0.7 m) section
  • 25 lbs (11 kg) 55"
• 5' (1.5 m) section
  • 42 lbs (19 kg)
• 10' (3 m) section
  • 81 lbs (37 kg) (76 cm)
• Span
  • up to 75' (23 m) 14' to 79'