Everest Refrigeration ETBR3-D2 Commercial Undercounter Refrigerator | Rent, Finance, or Buy

Everest ETBR3-D2 3 Section 1 Door & 2 Drawer Combo Undercounter Refrigerator, 71 1/2in.

Everest ETBR3-D2 3 Section 1 Door & 2 Drawer Combo Undercounter Refrigerator, 71 1/2in.
Product Specifications
BRAND  Everest Refrigeration
Everest ETBR3-D2 3 Section 1 Door & 2 Drawer Combo Undercounter Refrigerator, 71 1/2in.


Cabinet Construction
  • Heavy duty stainless steel interior / exterior with rounded corners for a hazard-free workspace.
  • 16 gauge, high quality stainless steel worktop.
  • Galvanized steel bottom and rear.
  • 5" thick high density polyurethane insulation.
  • Four 5" swivel casters with locks on front set.
Refrigeration System
  • Back mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environmentally friendly, EPA-compliant R290 refrigerant with zero (0) Ozone Depletion Potential (ODP) and three (3) Global Warming Potential (GWP). Blizzard R290 is easily replaceable and requires no on-site brazing.
  • Front air breathing for flexibility in installation.
  • Electronically commutated (ECM) fan motors achieve rapid cooling with less energy consumption.
  • Full-length air duct system ensures optimal circulation of cold air.
  • Time-initiated and temperature-terminated auto defrost cycle for seamless operation.
  • Large capacity, corrosion-resistant condenser and evaporator coils.
  • Self-maintaining, energy-efficient condensate drain pan requires no external drains or electric heaters.
  • High performance, auto-reverse condenser fan motor supports compressor ventilation and condenser coil cleaning. Refer to owner?s manual for full maintenance instructions.
  • Pressure relief devices allow smooth access to cabinet interior when re-opening doors.
  • Pre-wired and ready to plug, 115V/60Hz/1Ph, NEMA 5-15P.
Doors & Drawers
  • Heavy duty stainless steel interior / exterior.
  • 5" thick high density polyurethane insulation.
  • Thick gauge, stainless steel drawer frames with low-friction ball bearings.
  • Self-closing door with adjustable torsion system for a positive seal.
  • Snap-in magnetic door and drawer gaskets make cleaning and replacement an easy process.
  • High strength, recessed door and drawer handles.
  • Two epoxy coated, steel wire shelves (applies to model ETBR3-D2).
  • Height adjustable stainless steel clips.
Temperature Control
  • Multi-function digital controller with easy to read LED display.
  • Factory preset temperature, 35F. Temperature setting range from 33F to 54F.
  • Audible overheat protection alarm for compressor and condenser coil.
Product Specification
  • Temperature Refrigerator
  • Door Count 1
  • Door Style Swing Solid
  • Drawers 2
  • Shelves 2
  • Cu. Ft. Capacity 22
  • Exterior Length (in.) 71 1/8
  • Exterior Depth (in.) 31 1/2
  • Exterior Height (in.) 30 1/8
  • Power (V-Hz-Ph) 115-60-1
  • Amps 2.7
  • Compressor HP 1/3
  • Crated Weight (lbs.) 374
  • Top Pans N/A
  • Barrels N/A
Lead time for Delivery: 1 week

Don't see the specific model you need?

Request supplier quotes.

KWIPPED is an equipment rental and leasing marketplace. Suppliers have additional inventory available not listed on KWIPPED.
Our quoting and collaboration platform is an incredibly easy and efficient way to source from our entire supplier network.
Get quotes

Not sure if you should rent or finance?

Tell us what you're thinking and will offer a recommendation.

We have equipment rentals and leases for all your restaurant needs

First time using KWIPPED?

We've made it really easy.

Here are some resources to get you started with your first rental