Shinybow SB-5688CAP 8 x 8 HDMI Matrix Routing Switcher with Auxiliary Audio I/O and PoH

Shinybow SB-5688CAP 8 x 8 HDMI Matrix Routing Switcher with Auxiliary Audio I/O and PoH
Shinybow SB-5688CAP Overview
The Shinybow SB-5688CAP 8 x 8 HDMI Matrix Routing Switcher with Auxiliary Audio I/O and PoHsupports 8 HDMI and 8 auxiliary audio inputs. It features 8 HDMI, 8 SPDIF, and 8 HDBaseT with PoH outputs. This switcher is based on HDBaseT standards and supports transmission of full resolution HDMI video with embedded EDID, PoH signals, audio, RS-232, Ethernet, and bi-directional IR, over a single category cable. 
With a signal bandwidth of 340 MHz, the switcher supports distribution of full HD, 4K2K, HDMI V1.4a, and 3D formats with data rates of up to 6.75 Gb/s. It also supports UXGA, WUXGA, DVI, and 1920 x 1200 resolutions. This switcher can simultaneously transmit 8 input signals to 16 outputs (channel outputs mirrored). It is CEC and ARC certified, and is compliant with HDCP 2.0 protocols. 
The SB-5688CAP features 8 3.5mm AUX audio input to support transmission of analog audio signals. When used with an HDBaseT Receiver (not included), the switcher allows you to connect a display in remote locations. The EDID management can be selected between 7 different modes. Control is provided via front panel push buttons, IR remote, RS-232, or TCP/IP (not a web-browser). An RS-232 Windows GUI interface is provided for matrix routing control (Windows only).
  • 8 HDMI inputs with auxiliary audio support can be switched to 8 HDMI with S/PDIF outputs and 8 HDBaseT Transmitter with PoH
  • HDBaseT specification with support for PoH, 48VDC, IR, RS-232, multiple audio formats, and HD signals
  • Transmits video signals over a single CAT6/6a/7 cable
  • Supports HDMI digital video and DVI format
  • CEC/HDCP 2.0 compliant
  • Supports worldwide control EDID modes
  • Link speeds of up to 6.75 Gb/s (link clock rate of 340 MHz)
  • Supports HDMI 4K2K, 1.4a 3D formats
  • Supports a wide range of video resolutions from XGA to WUXGA and HDTV/DTV HDMI resolutions from 480i/480p, to 4K2K (24/30 Hz)
  • Compatible with all HDMI source devices, PC monitors, Plasma HD displays, HDTV, and audio receivers or audio amplifiers
  • Supports digital video TMDS format resolutions up to 4K2K with Deep color 36-bit
  • Offers digital audio support for Dolby TrueHD, Dolby Digital, Dolby Digital Plug/ex, DTS, DTS-HD, DTS-HD Master, DTS-EX, PCM, PCM2, and LPCM2
  • Support digital audio ARC or S/PDIF (from HDMI source or auxiliary audio)
  • Can be controlled via a Windows based GUI control via RS-232 port, front panel push buttons, IR wireless remote controller, Ethernet switch control, and third party RS-232 controller (via simple ASCII)
  • Supports ARC, AUX, All, Off, EDID, Lock, recall, memory, and enter functions via front panel buttons
  • Supports embedded FSS, H24-3D, H24-3D-M, H36-3D, H36-3D-M, 4K2K-3D, and DVI-D 1920 x 1200 60 Hz EDID modes
  • Features single learning and multiple learning external modes
  • Automatic scanning input and output status via LCM show on front panel
  • Using the build-in booster, each HDMI output port is capable of driving cable lengths 1080p up to 98' (30m) & 4K2K up to 66' (20m)
  • Supports IR remote and IR extender with distance up to 984' (300 m)
  • Operates from 90 to 240VAC, 50/60 Hz 
Shinybow SB-5688CAP Specs
  • Video Input8 x HDMI (HDMI or DVI digital source)
  • Audio Input8 x Audio (Analog Stereo, AUX port. 3.5 mm Jack)
  • Video Output8 x HDMI (to destination)
  • 8 x HDBaseT Transmitter (with PoH 48 VDC via category cable & RJ-45 connector)
  • Audio Output8 x S/PDIF: Multi Audio Formats 5.1 from HDMI or LPCM-2CH from Auxiliary audio
  • 8 x ARC: TV Return Channel Audio
  • 8 x HDMI: Multi Audio Formats 5.1 / 7.1, MAT (MLP), Dolby Digital, Dolby TrueHD, Dolby Digital Plus, DTS, DTS-ES 6 CH, DTS-HD, DTS-HD-HRA, DTS-HD Master, (PCM-2CH)
  • Control
    • HDBaseT Control I/O
      • 8 x RS-232 I/O (Control 8 rooms RS-232 via switcher's HDBaseT extender transmitter)
    • HDBaseT Control In
      • 8 x IR in (send IR signals to 8 Rooms via HDBaseT extender)
      • 1 x All IR in (send IR Signals to 8 rooms - Via HDBaseT transmitter)
    • HDBaseT Control Out
      • 8 x IR out (link to receive IR signals from 8 rooms via HDBaseT extender)
      • 1 x All IR out (link to receive IR signals from 8 rooms via HDBaseT extender)
      • 1 x LAN (All Switcher HDBaseT Transmitter Ethernet link to HDBaseT receiver)
  • Switch Controls
    • 1 x Select & Function buttons on front panel (Data status via LCM panel show out)
    • 1 x IR Remote Controller
    • 8 x IR room remote controller
    • 1 x IR External port (via 3.5 mm OD Jack)
    • 1 x RS 232 series interface
    • 1 x Ethernet series interface
  • Function ControlsARC, AUX, HDBaseT, ALL, Off, Recall, Enter, Memory, Lock, EDID, Destination (1 thru 8), Source (1 thru 8)
  • EDID ManagementSelect Embedded EDID Modes
    • Mode1: FSS
    • Mode2: H24-3D
    • Mode3: H24-3D-M
    • Mode4: H36-3D
    • Mode5: H36-3D-M
    • Mode6: 4K2K-3D, PCM-2CH
    • Mode7: DVI-D 1920 x 1200 60 Hz
    • Select Learning Mode: Learning Destination EDID to link source, Learning mode-1 (Single Learning), Learning mode-2 (Multiple Learning)
  • Infrared Frequency38 kHz
  • Transmission Distance SupportedIR: 984' (300 m) maximum
  • HDBaseT: 328' (100 m) maximum
  • HDMI ConnectorHDMI Type A - SMD 19-pin female type
  • StatusSource: Input status LEDs indicates presence of a live signal
  • Support
    • HDMI: HDMI 4K2K, 1080P @ 60 Hz, H36-bit Deep color, 3D HDMI V1.4 formats
    • HDBaseT: Bi-directional IR, RS-232, Multi format Audio, Ethernet and PoH, over one CATx cable
    • HDCP / CEC: HDCP 2.2 Compliant, CEC Compliant
  • Digital Video Support: HD:480i/ 480p/ 720p/ 1080i/p and 4K2K up to 36-bit deep color
  • Video BandwidthDouble Data Rates: 340 Mhz, 6.75 Gb/s total
  • Operating Temperature32 to 100°F (0 to 38°C)
  • Power Supply100 to 240 VAC 50/60 Hz
  • Power Consumption10 A maximum
  • Safety ApprovalsCE, FCC, REACH
  • Rack Mount2 RU High, 19.0" (48.2 cm) rack mount #2U-440L (included)
  • Dimensions (L x W x H)19.0 x 9.8 x 3.5" (48.2 x 25.0 x 8.8 cm)
  • Weight8.4 lb (3.8 kg)
Packaging Info
  • Package Weight20.55 lb
  • Box Dimensions (LxWxH)20.9 x 15.6 x 8.5"

Don't see the specific model you need?

Request supplier quotes.

KWIPPED is an equipment rental and leasing marketplace. Suppliers have additional inventory available not listed on KWIPPED.
Our quoting and collaboration platform is an incredibly easy and efficient way to source from our entire supplier network.
Get quotes

Not sure if you should rent or finance?

Tell us what you're thinking and will offer a recommendation.

We have equipment rentals and leases for all your photography & film needs

First time using KWIPPED?

We've made it really easy.

Here are some resources to get you started with your first rental